Fiber Optics, fiber optic news, fiber optic tools, FTTx, fiber optic forum by eFiberTools

Jilong KL-300 fusion splicer video with 0.01dB loss

Now this is exciting - 0.01dB loss

I guess there's no longer a reason to waste your money on a more expensive unit when you can purchase a Jilong KL-300 with US support and a 2 year warranty for almost half the price of a Fujikura. If you really want to drop your splicer on a soft 1 1/2" padded mat from 30" then go with the Fujikura 60s. If you want to save over $8000.00 then buy a Jilong KL-300.

Sumitomo Type 63 Mass/Ribbon Fusion Splicer Kit

[caption id="attachment_106" align="alignleft" width="300" caption="Sumitomo Type 63 Fusion Splicer"][/caption]Normally, you are not going to find specials and products for sell on our blog here, but
if you're looking for a great quality ribbon fiber splicer for a great price, we have 25 of these (Sumitomo type 63) in stock right now in our warehouse.

Our kit includes: Splicer, FCP-25 cleaver, JR-5 thermal hot jacket stripper, power supplies, fiber holders (250um & 12-fiber), cooling tray, VHS training video, printed user manuals, and power cord.

Click this link to view the actual page where you can purchase one or all of these fusion splicers.

These units are in excellent condition. Low arc counts.
Sumitomo Type-63 Mass Fusion Splicer:
Simultaneous focuses on up to 12 fibers at a time with equal fiber resolution size providing improved accuracy and speed.
Performs 12 count fiber splices in under 42 seconds.
Fixed V-Groove alignment.
Low Power Consumption with a built in power management functions, gives you the ability to splice longer on battery operation.
Large 5.6" LCD Display provides a clear fiber image even in direct sunlight.
Heater Cycle Time(12C): 110 Seconds.

Item Tested?: Tested
Terms of Sale: 30-Day Exchange Warranty
Physical Condition: Very Good
Working Condition: Fully Functional

Yokogawa AQ7270 OTDR

Need your help. Have any of our readers checked out this OTDR? Do any of you currently use it? Know of any prices of this particular model? We would like to list some user specs on this product.

[caption id="attachment_89" align="aligncenter" width="300" caption="What are your comments on it?"][/caption]

Manufacturers Description
The AQ7270 OTDR condenses the total working time during on-site tests as the time to power up the device, the time taken to make measurements, and the time

Fusion Splicer Show Down - Fujikura vs. Jilong

(courtesy of eFiberTools, updated by SurplusEQ)

While our other blogs had to do with price, I think you will agree when you see the side by side comparison of the "most popular" (Fujikura) fusion splicer vs. the new splicer (Jilong) on the block.

Jilong KL-300 vs. Fujikura50s

Category	Jilong KL300	Fujikura 50s
Fiber Types:	SM, MM, DS, NZDS	SM, MM, DS, NZDS
Splice Loss SM/MM:	0.02db/ 0.01db	0.02db/ 0.01db
Splice Loss DS/NZDS:	0.04db/ 0.04db	0.04db/ 0.04db
Return Loss:	60db or greater	60db or greater
Fiber Coating:	100um to 1000um	100um to 1000um
Fiber Cladding:	80um to 150um	80um to 150um
Splice Heater:	20 modes	all standard - micro
Atmospheric:	95% hum. / 5000m	Auto up to 3500m
Viewing Method:	dual cameras/color	dual cameras/color
Magnification:	300x / 150x for dual	295X / 147 for dual
Splice Memory:	4000 splices	2000 splices
Interface Options:	USB 1.1 / VGA	USB 1.1 / RCA
Power Supply:	100-240Vac / 50-60Hz	100-240Vac / 50-60Hz
DC Input:	Li-Battery 8000mah	10-15Vdc
Battery Life:	60-150 splice cycles	60 splice cycles
SElectrode Life	2500	1000
Splicer Dimensions:	150x150x150mm	150x150x150mm
Weight:	2.7Kg - 5.95 lbs	2.8Kg - 6.17 lbs
Operating Temp:	-40C to +50C 40F to 122F	-40c to +80C 40F to 176F
Storage Temp:	40Cto+50C 40Fto122F	40cto+80C 40Fto176F
Shrink Tube Time:	30 seconds	35 seconds
Splice Time:	10-13 seconds	9seconds
Screen Size:	117wide x 89high	117wide x 89high
Advertised Price: USD	$10,180.00	$17,900.00

Discontinued Fujikura 50s Fusion Splicer

One of the top selling fusion splicers on the market is now being discontinued. Now most of you in the fiber optic field are thinking the same thing, what do we do now? That's a good question and the answer is -
some companies are exchanging their Fujikura 50s splicers out with the new Jilong KL300 fusion splicer. Since the Exclusive Distributor SurplusEQ.com has a great introductory price of only $8585 for a brand new full fusion splicer kit, in the case with cleaver and everything, there's no reason not to give the KL300 your full attention. Everyone that

Jilong KL-300

You may not have had a chance to use this great fusion splicer yet, or some of you may not have even heard about it, but it looks like it's here and it's making an impact on the fiber optic market.

[caption id="attachment_4" align="aligncenter" width="300" caption="fusion splicer"][/caption]

Read the eFiberTools article on the Jilong KL-300